cantilever single twisting machine
usage:
high speed cantilever single twisting machine used for data cable, high frequency cable, instruments cable, HDMI, USB2.0/3.0 core wire pair twisting or laying up, taping, and hot melting finish in one process, high efficiency, quality under control.
machine featuers:
1. Royal machinery cantilever single twisting machine is high speed twisting machine, efficiency is 2 times of frame rotate single twisting machine.
2. Royal machinery cantilever single twisting machine can finish pair twisting or laying up/taping/hot melting finish in one twisting, inner structure more tight, higher efficiency.
3. Royal machinery small model cantilever single twisting machine is capstan type single twister, pitch more stable and accurate.
4. Royal machinery cantilever single twisting machine cantilever use pure aluminum, light load design, smaller wind resistant, higher rotating speed.
5. Royal machinery cantilever single twisting machine use big guiding wheel design, small bend, reduce the damage of the core wire.
technical parameter of pay off
structure: shaft type driven pay off for pair twisting machine.
Reel size: Max.Ф400, MinФ300
products range: 0.3 to 2.0mm
line speed: 40m/min, 5-75Hz.
Reel lift: manually
reel tighten: tip cone tighten
tension control: counter weight tension control, move weight block position to change pay off tension, potentiometer angel give out voltage signal linked control pay off motor
tension range: 0-1000g
wire break: machine auto alarm and stop
guiding pulley: Φ120 pulley set,3+2 grooves
driven power: 0.37KW gear motor
bearing weight: Max300KW
technical parameter of side taping machine
applicate cable: high frequency signal cable, data cable, control cable, and other cable pair core wire taping.
Suitable tape: Aluminum foil, copper foil, PE tape, PTFE tape, paper tape
tape OD: Max.400mm
tape holder: >400mm
suitable cable size: 1-5mm
tape ID: ≥75mm
tape width: 3-20mm
tape thickness: 0.02-0.20mm
tension control: counter weight type tension control,move weight block to change tension.
tension control element:with tension digital displayer,digital display tension, display tape tension in real time.
tension range: 30-1000g
tape break: tape break machine auto alarm and stop
tape finish: tape finish machine auto alarm and stop
taping die: tube taping die, avoid wire shaking and tape turn over.
taping power: 0.2KW motor with inverter
technical parameter of single twisting machine
take up reel: Φ400
single wire dia.: Ф0.4~1.2mm
twisted wire dia.: Ф1.0~2.5mm
Max RPM: 1000RPM/50HZ
twist pitch: 8~36 mm,precision±2%
line speed: 8~36m/min
twist direction: S,Z both
cantilever: hollow steel tube structure, light weight, small wind
guiding pulley: Ф120 mm
take up: shaft-moving take up, reel inner bore not less than 50 mm
take up tension: 1.2KG magnetic clutch, set on HMI
take up brake: magnetic brake
traverse: screw rod traverse
main power: 1.5KW/2HP 3P 380V
traverse power: 0.75KW/1HP 3P 380V
reel in and out: with sliding ramp.
reel lift: pneumatic
cantilever brake: disc break
dimension: 1800X900X1100(LXWXH)
center weight: 560mm
machine inner structure: